How to do All Keys Lost with Ford Fusion using Autel IM608 Pro?

In this artical we're going to perform all keys lost for this ford fusion using the IM608, you will need at least two paired keys at the end of this proecss.

So if you are performing all keys lost, make sure you have two blank keys to start.

First plug in the VCI or vehicle communication interface to the OBD2 port, located underneath the steering column,pair the VCI with the IM608 in VCI manager.

Now that we're connected, we can tap IMMO which stands for immobilizer and find our vehicle. Automatically scan the vehicle to get the VIN or manually input the vehicle's information.

Head into unit and tap "Keyless System(CAN)", tap key learning then all smart keys lost, tap ok. This process will delete all current keys. Confirm that the car alarm is not active, press no. Wait up to 10 minutes, press yes, if you want to clear all keys you will need two keys at the end of this process.

In order to start the vehicle, tap ok. Place the first key to be learned in the key slot in the middle compartment, it will pair instantlu, take it out, then place the second key in the compartment. Once your keys are learned test them by walking and unlocking the doors and turning on the engine