This article will demonstrate how to create a new key for this 2020 Honda Accord using the Autel MaxiIM IM608 Pro
First establish a connection to the vehicle, using the J2534 MaxiFlash JVCI included with the IM608.
Ensure that the tablet is connected to the internet throughout the programming session and that the J2534 is connected with the IM608 via bluetooth.
It's good practice before any key learning or immobilizer to perform a scan of the vehicle to ensure that there are no faults in the IMMO related systems that prevent us from completing our tasks.
So let's get to add a key.
Select IMMO on the tablet
Then tap the VIN icon to auto detect your vehicle or manually input your vehicle's
After confirming the vehicle and key type information
We tap IMMO status scan and run a scan to detect any fault codes for all modules related to the anti-theft system.
In order to do so, we need to place a working key into the car. The ignition is on and we can start our scan.
Our scan comes up green meaning no issues were found if a code displays unrelated to the immobilizer or anti-theft systems confirm that it will not hinder the key programming process,and you can continue with key learning but make a note to address that code later.
So we will continue with key learning
Select add key guided
In this process we will need to turn the ignition on and off a few times.
Now we need to take our working key out of the vehicle.
Now we can place a new key into the vehicle, a notification will display that the new key is now registered
If you have other keys that you want to learn, you can do so.
Now we can check our new key to see if it works by turning the engine on or locking or unlocking the car.
If adding the key failed, we can run a scan to see if the issue is related the anti-theft system, once adding is successful we can run a scan to check if has any issues, the scan also will confirm if the number of keys is correct and if the ECU is paired correctly.
So that was the simple process for learning how to add a new key for this honda vehicle via the obd2 port. Autel MaxiIM IM608 Pro makes it easy for shop owners to create new vehicl key even if all keys are lost.
This article introduces how to create a key for honda, which is different from the procedures we usually use XP400 Pro to read passwords, store information, and create new keys. That is our honda and other Asian models are relatively low-level anti-theft systems. , do not need the assistance of programming tools such as XP400 pro, we will update if you add a new key to BMW, Mercedes-Benz, Volkswagen and other models, so stay tuned.
Produkte können je nach Land/Region unterschiedliche Preise und Verfügbarkeiten haben.